Water’s role as the largest byproduct of oil and gas production has become increasingly problematic.
“If you can’t handle the produced water or if you can’t manage it and it gets out of hand, then it will impact your operations as it will impact energy production,” Devesh Mittal, vice president and general manager at Aquatech Energy Services, told Hart Energy. “So, while it is a byproduct, it can be a sort of hindrance if you’re not able to manage it.”
Produced water comes out of the well along with crude oil when a reservoir is being produced. It can contain both soluble and non-soluble oil and organics, suspended solids, dissolved solids and other chemicals used in the production process. Operators are required by law to manage that waste.
Traditionally, produced water has been injected into underground disposal wells. However, the capacity of these injection wells is limited and the increased use of disposal wells has, in some instances, been linked to seismic activity such as earthquakes. This has led to stricter regulations on the use and development of disposal wells.
Mitigating the impact
That’s where companies like Aquatech come in.
“We are working to reduce the impact of the increasing volumes of produced water. We’ll recover and purify that and then treat that recovered water to make it suitable for a variety of applications, tailored to a customer’s specific needs,” Mittal said.
Aquatech’s go-to solution is reuse and recycling. For produced water to be reused, the chemicals and organics from the formation must be removed. For water with a high level of total dissolved solids (TDS), Aquatech employs clarifiers and evaporators to use at or near the wellpad. In Oman, Aquatech has one of the largest evaporator systems on produced water, Mittal said, treating about 300,000 bbl/d.
“In certain instances, depending on the TDS of the produced water, it can be recovered using membrane systems such as our Osmotically Assisted Reverse Osmosis (OARO),” Mittal said.
Reverse osmosis is a popular method for water purification in the industry due to its low energy consumption. During the process, seawater or brackish water is forced through a semipermeable membrane, leaving salt and other contaminants on the pressurized side of the membrane while pure water is allowed to pass through.
Aquatech uses a variety of membrane-based solutions, most notably its Advanced Recovery Reverse Osmosis (ARRO) process. ARRO uses modular configuration and automation technology to reduce operator intervention and achieve water recovery rates of over 95%, which is 20% better than traditional reverse osmosis solutions.
In addition to ARRO, Aquatech’s High Efficiency Reverse Osmosis (HERO) system places reverse osmosis membranes in a high pH environment, causing them to remain in a “continuous cleaning mode.” This prevents contaminants from collecting in the pores of a filtration membrane and restricting water flow.
Once rid of the various contaminants in the water, the produced water is available for reuse in applications such as EOR or even irrigation of crops if the water is pure enough.
Adding lithium extraction
Aquatech is also stepping into water reuse in lithium production.
Most produced water has only a small concentration of lithium, but since the amount of produced water from traditional oil and gas operations is significant, a reasonable amount of lithium can be gathered from the process. Lithium, used in batteries, opens up a completely new pathway for Aquatech customers to generate revenue from water.
“Finding ways to extract lithium out of produced water is a way to reduce the cost of managing this water,” said Mittal. “Right now, it’s a waste, but if you can convert it into a critical mineral source and you can recover revenue out of it, then it might offset some of the overall water management costs.”
The company has succeeded in the oil and gas industry for more than 40 years because of its ability to scale treatment solutions, Mittal said. Now it’s working on scalability for lithium production.
“The quantity of produced water is increasing, so we have to work to find innovative ways to supplement our current ways of dealing with produced water to provide long-term sustainability,” Mittal said. “That’s where we are putting our minds and money.”
Recommended Reading
ConocoPhillips: Permian Basin a ‘Growth Engine’ for Lower 48
2024-05-15 - ConocoPhillips views the Permian Basin as a “growth engine” within its Lower 48 portfolio, the company’s Midland Basin Vice President Nick McKenna said during Hart Energy’s SUPER DUG event in Fort Worth.
CEO: Continental Adds Midland Basin Acreage, Explores Woodford, Barnett
2024-04-11 - Continental Resources is adding leases in Midland and Ector counties, Texas, as the private E&P hunts for drilling locations to explore. Continental is also testing deeper Barnett and Woodford intervals across its Permian footprint, CEO Doug Lawler said in an exclusive interview.
Barnett & Beyond: Marathon, Oxy, Peers Testing Deeper Permian Zones
2024-04-29 - Marathon Oil, Occidental, Continental Resources and others are reaching under the Permian’s popular benches for new drilling locations. Analysts think there are areas of the basin where the Permian’s deeper zones can compete for capital.
US Gas Rig Count Falls to Lowest Since January 2022
2024-03-22 - The combined oil and gas rig count, an early indicator of future output, fell by five to 624 in the week to March 22.
TPH: Lower 48 to Shed Rigs Through 3Q Before Gas Plays Rebound
2024-03-13 - TPH&Co. analysis shows the Permian Basin will lose rigs near term, but as activity in gassy plays ticks up later this year, the Permian may be headed towards muted activity into 2025.